SFX-10 - Deja Vu Tap Delay
Specifications
Input Impedance: 1 Megohm (1000K ohms)
Output Impedance: 1K ohm (1000 ohms)
Battery Life: 10 hours with premium alkaline battery
Power source: 9V battery or external 9VDC regulated
wall transformer with center pin negative. Current drain
50mA.
Delay time: 32ms to 2.6 seconds
Regeneration: Continuously adjustable from “off” to
runaway build-up
Analog Delay Element: NMOS Bucket Brigade Device
(BBD)
Digital Delay Element: Microprocessor-controlled 24
bit Codec and SDRAM
Output Clipping Level: 7V Peak-to-Peak
Dynamic Range: Dry Signal 116dB; Digital Delay
93dB; Analog Delay 60dB
Noise Referred to Input: Dry Signal -110dBV
Delay Ratio Multipliers: 1, 1.33 (dotted eighth note),
2, 3, 4
Distortion: Dry Signal 0.003%; Digital Delay; Analog
Delay 0.08%
Nominal Gain: 1:1
Bypass Type: Switch selectable between hardwire true
bypass and electronically switched trailing repeats